DoorProtect Plus
Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.
Description
Principle of operation
The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
Features
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
- Built-in accelerometer reacts to vibration and impact
- Detects inclination angle relative to the ground
- Allows connection to a third-party hard wired reed switch
- Ideal for monitoring window movement
- Battery life is up to 7 years
Tech Specs
Classification | Combined point magnetic contact and vibration radio channel security detector | |
Type of detector | Wireless | |
Installation method | indoors | |
Compatibility | Operates with all Ajax hubs, and range extenders | |
Sensing element | Reed switch, accelerometer | |
Alarm signal delivery time | 0.15 s | |
Activation threshold | Small magnet — 1 cm, Big magnet — 2 cm, Tilt | more than 5°, |
Power supply | Battery - CR123A battery, 3 V | |
Battery life | Up to 5 years | |
Sensor resource | 2,000,000 openings | |
Temperature sensor | Available | |
Operating temperature range | From -10°С to +40°С | |
Permissible humidity | Up to 75% | |
Anti-sabotage | Protection against fraud, Jamming detection, Tamper-resistant | |
Dimensions | Diameter - 20 mm, Height - 90 mm | |
Weight | 29 g | |
Service life | 10 year | |
Included in box | DoorProtect Plus opening detector, SmartBracket mounting panel, Two magnets, CR123A battery (pre-installed), External contact, Installation set, User's guide |
External contact is available for connecting third-party detectors
Features
The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.
Registers change in vertical slope angle, bangs and vibration
Principle of operation
The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.