AJAX Fibra MultiTransmitter Plus

MultiTransmitter Jeweller

Module for connecting wired alarm to Ajax and managing security via the app

Description

Advanced security systems require the use of modern communication devices to perform complex tasks and provide the user with a high level of protection. If the alarm system is outdated, it needs to be updated. It is unnecessary to replace all alarm devices and change many wires completely. Several Ajax devices can be added to the security system, transforming the old system into a new generation of burglar alarms, convenient control from the user's mobile phone, and advanced security technologies. The Ajax MultiTransmitter integration module, which operates at 868.0-868.6 MHz and has 18 alarm zones, is used to add third-party wired sensors to the Ajax wireless control panel. The radio integration module interacts with the intelligent control panel in an open area without obstacles at a distance of up to 2000 meters and indoors - between several floors. The broadcast signal is protected by encryption for the secure transmission of information. To check the operability of the transmitter, the control panel conducts a poll of the device every 12-300 seconds. The frequency is adjusted by the user individually. The power supply of the integration module for the alarm system comes from the 100-240 V AC network. The transmitter can operate autonomously from the backup battery for 12 V for four days. In addition, the integration radio module can provide 12 V power to the system sensors. The transmitter board has terminals for connecting alarm zones and powering fire sensors.

Compatibility	Control panels Hub Hybrid (2G) Hub Hybrid (4G)
Communication	Fibra communication technology Proprietary wired communication technology. Fibra combines the reliability of wires with the freedom of radio connection. It features: Two-way communication. Advanced anti-sabotage. Instant notifications. Remote configuration via the app. Line connection 4-core cable Fibra line length up to 2,000 m When using the U/UTP cat.5 twisted pair. Calculate line length at the facility Encrypted communication
Wired devices connection	Number of zones 18 wired zones Multiple devices can be connected to one zone. The number of connected devices depends on their power consumption. Type of connection NC, NO, EOL, 2EOL, 3EOL With EOL resistance from 1 kΩ to 30 kΩ with 100 Ω increment. Cable length up to 400 m When using a copper signal cable with a 0.22 mm² cross-sectional area of the conductor. Operation mode pulse, bistable Event types 15 event types of wired devices Tamper alarm Intrusion Fire Auxiliary alarm Panic button Gas alarm Malfunction Leakage Glass break High temperature Low temperature Masking Duress code (opening) Vibration (seismic sensor) Custom Adjusted by a PRO or a user with admin rights in the Ajax app.
Recommendations	The device is powered from the 100–240 V~ mains and designed for indoor use only.
Anti-sabotage protection	Tampering alarm Two tampers to detect the lid opening and alert about detachment from the wall. Protection against forgery Device authentication Communication loss detection within 36 seconds Between hub and MultiTransmitter Fibra. Instant detection of wired connection loss, short circuits and malfunctions when using 2EOL/3EOL connection Depends on the connection type.
Power supply	Main 100–240 V~ Backup 12 V⎓, up to 7 Ah capacity with a full charge cycle of up to 30 hours Type type A Used inside the supervised premises. Operating AC voltage range 100–240 V~, 50/60 Hz Main power supply. Operating DC voltage range 10.5–15 V⎓ Backup power supply. Quiescent current consumption at nominal voltage 25 mA* Maximum current consumption at nominal voltage 30 mA* * From the backup battery after the loss of the main power supply. Backup battery capacity up to 7 Ah with a full charge cycle of up to 30 hours When using a 4 Ah battery, the minimum operating time at a maximum load of 1.7 А is 2 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.3 A and 0.15 A, respectively. When using a 7 Ah battery, the minimum operating time at a maximum load of 1.7 А is 4 hours. For autonomous operation for 12 or 24 hours, the maximum load should not exceed 0.4 A and 0.2 A, respectively. Maximum time to recharge a 7 Ah battery to 80% of its capacity. Power supply of connected wired devices 10.5–15 V⎓, up to 1 A (total maximum current consumption) Three power supply lines from MultiTransmitter Fibra. Power supply of connected fire detectors 10.5–15 V⎓, up to 0.4 A One power supply line from MultiTransmitter Fibra. Low battery voltage 11.6 V⎓ Low battery recovery voltage 12.6 V⎓ End-of-life battery voltage 10.5 V⎓ Maximum output peak-to-peak ripple battery voltage 200 mV⎓ Minimum backup battery energy level in the charged state 100%
Enclosure	Dimensions 192 × 238 × 100 mm Weight 798 g Excluding the backup battery. Operating temperature range from −10°C to +40°C Operating humidity up to 75% Protection class IP40 The new casing version of MultiTransmitter Fibra has light guides for the integration module LED indication, while the previous version has the LED indicator on the board.
Colours	Black and White
Complete set	MultiTransmitter Fibra Power cable Screw terminal block adapter (for INCERT compliance only) 12 V battery connection cable Casing Installation kit Quick start guide

Making security smart

Turn an outdated burglar alarm into an intelligent security system. The integration module supports a wide range of sensors. Perimeter IR detectors, household gas sensors, thermostats, float sensors, keypads, and other third-party devices can be connected to MultiTransmitter Fibra to deliver comprehensive security. With MultiTransmitter Fibra, system users get security control via app, data-rich notifications, and automation scenarios.