KeyPad
Wireless touch keypad is used for arming/disarming of Ajax security system. It is mounted in the room near the entrance door to provide quick access to the keypad.
Description
Principle of operation
The device operates security modes when a digital code is entered on the keypad. Indication notifies of current security status, problems with detectors or breakdown of communication with the hub.
Features
Alarm button is available. It notifies of each attempt to guess the password and blocks automatically if the permissible number of entries is exceeded.
Tech Specs
| Classification | Radio channel touch keypad |
| Type of keypad | Wireless, touch |
| Installation method | Indoor |
| Compatibility | Operates with all Ajax hubs, and range extenders |
| Number of buttons | 15 |
| Duress code | Yes |
| User Passcode | Yes |
| Protection against passcode guessing | Yes |
| Arming/disarming indication | Yes |
| Power supply | Battery - 4 × ААA batteries, 3 V (batteries are installed in pairs) |
| Battery life | Up to 2 years |
| Temperature sensor | Available |
| Operating temperature range | From -10°С to +40°С |
| Permissible humidity | Up to 75% |
| Anti-sabotage | Protection against fraud, Jamming detection, Tamper-resistant |
| Dimensions | 150 × 103 × 14 mm |
| Weight | 197 g |
| Service life | 10 years |
| Complete set | KeyPad touch keyboard, SmartBracket mounting panel, 4 ААА batteries (pre-installed), Installation set, User's guide |
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the keypad. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Access for unregistered users
KeyPad supports up to 99 keypad access codes* for people not registered in the Ajax system. Thanks to this feature, there is no need to create accounts for office employees, a cleaning company, or a realtor: it is enough to assign an access code to a person in the hub settings.
> Сreating and editing codes remotely
> Notifications for adding, removing, and deactivating code
> A unique name and ID binding to identify the user
