Skip to main content

DoorProtect Plus

Wireless opening detector notifies of first signs of intrusion into the room through the door or window. It is installed even on roof windows which can be left open when leaving the house.

Description

Principle of operation

The device detects the door or window being opened by means of British-made hi-end reed switches on which the magnetic field acts. It can operate in the transmitter mode, sending a signal from the wired sensor to the hub.

Features

The device protects even windows left open for ventilation. The accelerometer registers changes in vertical slope angle, bangs or vibration and sends an alarm to the hub.

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.

  • Built-in accelerometer reacts to vibration and impact
  • Detects inclination angle relative to the ground
  • Allows connection to a third-party hard wired reed switch
  • Ideal for monitoring window movement
  • Battery life is up to 7 years

Tech Specs

Classification Combined point magnetic contact and vibration radio channel security detector  
Type of detector Wireless  
Installation method indoors  
Compatibility Operates with all Ajax hubs, and range extenders  
Sensing element Reed switch, accelerometer  
Alarm signal delivery time 0.15 s  
Activation threshold Small magnet — 1 cm, Big magnet — 2 cm, Tilt more than 5°,
Power supply Battery - CR123A battery, 3 V  
Battery life Up to 5 years  
Sensor resource 2,000,000 openings  
Temperature sensor Available  
Operating temperature range From -10°С to +40°С  
Permissible humidity Up to 75%  
Anti-sabotage Protection against fraud, Jamming detection, Tamper-resistant  
Dimensions Diameter - 20 mm, Height - 90 mm  
Weight 29 g  
Service life 10 year  
Included in box DoorProtect Plus opening detector, SmartBracket mounting panel, Two magnets, CR123A battery (pre-installed), External contact, Installation set, User's guide  

Installation and set up

Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.